Product Description
TeraFlex 4" Alpine PreRunner Long Arm Suspension System | No Shocks | 4 Door (Wrangler JK 2007-2018)
TeraFlex Alpine CT (Cross-Trail) Suspension Systems build on our Sport ST (Street & Trail) Suspension Systems. The TeraFlex 4" Alpine CT4 Prerunner Long Arm Suspension System includes all the components necessary for a purpose-built speed system. The Alpine CT4 Prerunner builds on the standard Alpine CT4 by adding heavy-duty suspension limit straps and front and rear SpeedBump Bump Stops tuned for high-speed travel. The Alpine CT4 Prerunner Long Arm Suspension System is built to handle high-speed off-road excursions! Our adjustable Alpine Long Control Arms balance front caster angle and pinion angles as well as optimize rear pinion angles anti-squat geometry and tire position on vehicles with 3-6" lifts. On higher lifts Alpine Long Arm Brackets reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during extreme droop as well as shock load transferred through the Alpine Long Control Arms. The HD Forged Adjustable Front and Rear (4"+) Track Bars and Rear Track Bar Bracket improve steering response center the axles to optimize vehicle roll center and reduce body roll for unsurpassed handling. This results in improved suspension geometry and relaxed control arm angles for a superior ride quality and performance regardless of terrain. These systems restore front and rear roll axis angles to minimize brake dive and acceleration squat. TeraFlex suspension systems provide reduced noise vibration and harshness (NVH). Alpine CT Suspension Systems are engineered for hardcore Jeeping without sacrificing weekday ride comfort!
Kit Includes:
- Long arm suspension
- Front coil springs
- Rear coil springs
- Front and rear trackbar
- SpeedBump bumpstops
- Necessary hardware
- Installation instructions
- Designed for wide-open driving
- HD suspension limit straps limit down travel safely to prevent drivetrain, suspension, and/or fender damage
- Front and rear SpeedBump Bump Stops provide progressive compression during high-speed suspension movement
- CT Long Arm Suspension Systems: Adjustable Alpine Long Control Arms & Brackets balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 3-6" lift kits
- Alpine Long Control Arms are constructed from durable 42mm x 4mm (upper) or 50mm x 5mm
- (lower) wall DOM tube for maximum strength
- On higher lifts, Alpine Long Arm Brackets reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during extreme droop as well as shock load transferred through the Alpine Long Control Arms
- Alpine Long Arm Brackets are gusseted and reinforced for superior strength w/ reduced NVH compared to other long arm kits
- Cross-Trail: Delivers true Cross-Trail (CT) performance
- Dependable performance w/ zero worries
- Positive, responsive handling w/ reduced NVH
- High-quality, dependable, maintenance-free, factory-style bushings provide excellent NVH damping and ride quality.
- HD Forged Adjustable Front and Rear (4"+) Track Bars and Rear Track Bar Bracket improve steering response, center axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling
- Front SpeedBump and rear Progressive Bump Stops provide progressive compression during high-speed suspension movement • Coil spring retainers prevent the springs from unseating during full suspension travel
- Full range of movement for off-road flex and articulation
- TeraFlex Limited Lifetime Warranty against defects
- Estimated installation time: 20 hours
Notes:
** Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters (# 1055000) for stock wheels – NOT INCLUDED.
*** We highly recommend driveshaft modifications such as our High-Angle Rzeppa CV Driveshafts or our High-Angle Rzeppa CV Joint Kit (# 1744014).
**** Requires cutting/removal of factory control arm bracketry to install Alpine Long Arm Brackets.
***** Requires cutting and welding.
****** Alignment required.
******* Requires longer shocks – we recommend Falcon Series 3.3 Fast Adjust Piggyback Shocks (JK 2dr: # 02-01-33-400-253 or JK 4dr: # 03-01-33-400-253).
