Product Description
TeraFlex 4.5" Alpine RT4 Long Arm Extended Travel Suspension | No Shocks (Gladiator JT 2020+)
TeraFlex Alpine RT (Rogue Trail) Suspension Systems build on our already capable Alpine CT (Cross-Trail) Suspension Systems. These systems include all our top-of-the-line components. The 4.5” Alpine RT4 Long Arm Extended-Travel Suspension System excels on the highway, off-road, through the desert, or rock crawling! Bolt-on Alpine IR Long Arms & Brackets, HD Forged Adjustable Track Bars, and Track Bar Brackets allow full suspension adjustability, while the SpeedBumps smooth out unexpected trail bumps. Adjustable Alpine IR Long Arms balance front caster angle and pinion angles as well as optimize rear pinion angles, anti-squat geometry, and tire position on vehicles with 3–6” lifts. On higher lifts, Long Arm Brackets reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during extreme droop as well as shock load transferred through the Long Control Arms. Independent Rotation (IR) Bushings remove bushing bind during full suspension travel for less overall bushing load during articulation resulting in unrestricted droop as well as a noticeable ride improvement whether on the highway or the trail. HD Forged Adjustable Track Bars and Track Bar Brackets improve steering response, center the axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling. Extended-Travel Suspension Systems include carefully selected components to safely provide 16” of rear suspension travel. This results in improved suspension geometry and relaxed control arm angles for a superior ride quality and performance regardless of terrain. These systems restore front and rear roll axis angles to minimize brake dive and acceleration squat. TeraFlex suspension systems provide reduced noise, vibration, and harshness (NVH). Alpine RT Suspension Systems are for the Jeeper who wants it all! Does NOT include shocks. We recommend Falcon Performance Shocks. Sold separately.
Kit Includes:
- Front track bar
- Front quick disconnect kit
- Rear track bar axle bracket
- Rear track bar
- Transmission skid plate & crossmember reinforcement
- Extended travel shock accessory kit
- Rear sway bar kit
- Rear spring retainer kit
- Front lower long arms
- Front upper long arms
- Front coil springs
- Rear coil springs
- Rear upper long arms
- Rear lower long arms
- Front long arm bracket kit
- Rear long arm bracket kit
- Front speed bump kit
- Rear driveline center support mount lowering spacer kit
- Necessary hardware
- Installation instructions
- Lift Height: 4.5”
- Sport/Overland Fenders: 33–37” Tires
- Rubicon/Mojave fenders: 35"-39" Tires
- Adjustable Alpine IR Long Arms & Brackets balance front caster angle and pinion angles as well as optimize rear pinion angles and tune anti-squat geometry for proper suspension alignment on 3–6” lift kits
- Control arms constructed from durable 42mm x 4mm or 50mm x 5mm wall DOM tube for maximum strength
- On higher lifts, bolt-on Long Arm Brackets reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during extreme droop as well as shock load transferred through the Long Control Arms
- Long Arm Suspension Crossmember and RockGuard Transmission Skid Plate provide additional strength
- Driveshaft Lowering Spacers, Forged ST Sway Bar, and Extended-Travel Accessory Kit safely provide 16” of rear suspension travel
- Rear Coil Spring Retainers prevent the springs from unseating during full suspension travel
- Dependable performance w/ zero worries
- Positive, responsive handling w/ reduced NVH
- Innovative, maintenance-free IR Bushings provide unrestricted rotation and flex as well as excellent NVH damping to improve on- and off-road ride quality and performance
- HD Forged Adjustable Track Bars and Track Bar Brackets improve steering response, center axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling
- SpeedBump and Progressive Bump Stops provide progressive compression during high-speed suspension movement
- Features Front Sway Bar Quick Disconnects
- Full range of movement for off-road flex and articulation
- TeraFlex Limited Lifetime Warranty against defects
- Estimated installation time: 10-12 hours
Notes:
** REQUIRES aftermarket wheels w/ 4.75” backspacing or less – or 1.75” Wheel Offset Adapter Pairs for stock wheels – NOT INCLUDED
*** Models with plastic bumpers REQUIRE removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tires.
**** Sport/Overland fenders REQUIRE 3” Front and 2.5” Rear Bump (INCLUDED) to fit 35” tires
***** Sport/Overland fenders REQUIRE 4” Front and 3.5” Rear Bump to fit 37” tires. REQUIRES additional components | Rubicon/Mojave fenders REQUIRE 2” Front and 2.5” Rear Bump (INCLUDED) to fit 37” tires
****** Rubicon/Mojave fenders REQUIRE 4” Front and 3” Rear Bump to fit 39” tires. REQUIRES additional components
******* EcoDiesel models REQUIRE 1” Lift Front Coil Spring Spacer Kit (# 1155100) — NOT INCLUDED.
******** REQUIRES cutting/removal of factory control arm bracketry to install Long Arm Brackets
********* REQUIRES longer shocks (NOT INCLUDED) – Falcon Performance Shocks recommended.