Product Description
TeraFlex 3.5" Alpine CT3 Short Arm Extended-Travel Suspension | No Shocks (Gladiator JT 2020+)
TeraFlex Alpine CT (Cross-Trail) Suspension Systems build on our Sport ST (Street & Trail) Suspension Systems. A 3.5” suspension system opens up a new world of tire sizes and off-road possibilities. If you have that “do it all” attitude, the 3.5” Alpine CT3 Short Arm Extended-Travel Suspension System will make it happen. Our Alpine Short Control Arms, Front HD Forged Adjustable Track Bar, and Front and Rear Track Bar Axle Brackets combined with our extended-travel components provide maximum tunability and flawless performance for years to come. Adjustable Alpine Short Control Arms balance front caster angle and pinion angles as well as optimize rear pinion angles, anti-squat geometry, and tire position on vehicles with 0–4.5” lifts. The Front HD Forged Adjustable Track Bar and Front and Rear Track Bar Axle Brackets improve steering response, centers the axle to optimize vehicle roll center, and reduces body roll for unsurpassed handling. Extended-Travel Suspension Systems include carefully selected extended-travel components to safely provide 16” of rear suspension travel. This results in improved suspension geometry and relaxed control arm angles for a superior ride quality and performance regardless of terrain. These systems restore front and rear roll axis angles to minimize brake dive and acceleration squat. TeraFlex suspension systems provide reduced noise, vibration, and harshness (NVH). Alpine CT Suspension Systems are engineered for hardcore Jeeping without sacrificing weekday ride comfort! Does NOT include shocks. We recommend Falcon Performance Shocks. Falcon shock absorbers and TeraFlex lift coil springs have been engineered together to improve both compression and rebound for optimal vehicle stability. Falcon shock absorbers and steering stabilizers available separately.
Kit Includes:
- Front coil spring pair
- Rear coil spring pair
- Extended travel shock accessory kit
- Forged ST rear sway bar kit
- Coil spring base retainer kit
- Extended travel axle bracket kit
- Front adjustable track bar
- Front quick disconnect kit
- Rear track bar axle kit
- Alpine control arm kit (all 8 arms)
- Necessary hardware
- Installation instructions
- Lift height: 3.5"
- Sport/Overland fenders: 35" tires
- Rubicon fenders: 37" tires
- Control arms balance front caster angle and pinion angle as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 0-4.5" lifts
- Control arms constructed from 42mm x 4mm wall DOM tube for maximum strength
- Bolt on extended travel axle brackets install between factory axle mounts and rear upper control arms
- Rear coil spring retainers prevent the springs from unseating during full suspension travel
- Dependable performance with zero worries
- Positive, responsive handling with reduced NVH
- High quality, dependable, maintenance free factory style bushings provide excellent NVH damping and ride quality
- Front adjustable track bar improves steering response, centers axle to optimize vehicle roll center and reduces body roll for unsurpassed handling
- Front and rear progressive bump stops provide progressive compression during high speed suspension movement
- Full range of movement for offroad flex and articulation
- Limited lifetime warranty against defects
- Estimated installation time: 10 hours
Notes:
** Requires aftermarket wheels with 4.75" backspacing or less OR offset wheel adapters for stock wheels- not included
*** Models with plastic bumpers require removal of bumper-to-fender wind deflection/splash guard to fit 35" or larger tires
**** Sport/Overland fenders require 3" front and 2.5" rear bump stop/strike pad extensions/shims to fit 35" tires- included | Rubicon fenders require 2" front and 2.5" rear bump stop/strike pad extensions/shims to fit 37" tires- included
***** EcoDiesel models require 1" lift front coil spring spacer kit (TER-1155100)- not included
****** Requires longer shocks- not included
