Product Description
TeraFlex 2.5" Alpine CT2 Suspension | No Shocks | 4 Door (Wrangler JL 2018+)
TeraFlex Alpine CT (Cross-Trail) Suspension Systems build on our Sport ST (Street & Trail) Suspension Systems. The 2.5" Alpine CT2 Short Arm Suspension System was designed for the enthusiast who wants to fine tune their suspension. Alpine Short Control Arms allow tuning of the caster and pinon angles centering of the axles in the wheel wells and wheelbase adjustment. The zero-maintenance adjustable control arms make the Alpine CT2 the perfect all-around suspension system. Adjustable Alpine Short Control Arms balance front caster and pinion angles as well as optimize rear pinion angles anti-squat geometry and tire position on vehicles with 0-4.5" lifts. The Front HD Forged Adjustable Track Bar and Front and Rear Track Bar Axle Brackets improve steering response center the axles to optimize vehicle roll center and reduce body roll for unsurpassed handling. This results in improved suspension geometry and relaxed control arm angles for a superior ride quality and performance regardless of terrain. These systems restore front and rear roll axis angles to minimize brake dive and acceleration squat. TeraFlex suspension systems provide reduced noise vibration and harshness (NVH). Alpine CT Suspension Systems are engineered for hardcore Jeeping without sacrificing weekday ride comfort! Does NOT include shocks. We recommend Falcon Performance Shocks. Falcon shock absorbers and TeraFlex lift coil springs have been engineered together to improve both compression and rebound for optimal vehicle stability. Falcon shocks and steering stabilizers sold separately.
Kit Includes:
- Front & rear coil springs
- Front & rear upper control arms
- Front & rear lower control arms
- Front track bar
- Rear track bar bracket
- Progressive bump stop kit
- Bump stop strike pad extension kit
- Bump stop strike pad shim kit
- Front sway bar disconnects
- Rear sway bar end links
- Front spring perches
- Necessary hardware
- Installation instructions
- Sport/Sahara fenders: 35" tires
- Rubicon fenders: 35-37" tires
- Adjustable Alpine short control arms balance caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 0-4.5" lift kits
- Alpine short arms are constructed from 42mm x 4mm wall DOM tube for maximum strength
- Bolts to the factory control arm mounting brackets
- No welding required
- Dependable performance with zero worries
- Positive, responsive handling with reduced NVH
- High quality, maintenance-free factory style bushings provide excellent vibration damping and ride quality
- Front HF adjustable track bar and front and rear track bar brackets improve steering response, center axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling
- Front and rear bump stops provide progressive compression during high speed suspension movement
- Full range of movement for offroad flex and articulation
- Limited lifetime warranty against defects
- Estimated installation time: 8-10 hours
Notes:
** Wheel spacers or aftermarket wheels with 4.75" of backspacing or less are required
*** Bumper-to-fender wind deflector/splash guards may need to be removed in order to fit 35" or larger tires
**** Shocks not included; available separately