Product Description
Synergy 2" Stage 1 Suspension System | 4 Door (Wrangler JL 2018+)
Synergy MFG Suspension Systems use a synergistic approach, meaning the combined effect of the components is greater than the sum of the individual parts. The overall performance of the system is the most important factor when we are designing components to work together. Synergy MFG Suspension Systems are complete systems for your vehicle and include all necessary components for the lift height and performance advertised. All of these systems have shock solutions available, whether it be shock relocation brackets to continue using the stock shocks in our Starter System or one of our Synergy MFG tuned shock packages aimed at affordability or performance. Coil springs and shocks are two of the largest determining factors in ride quality and a mismatched system will never perform to its potential. All Synergy MFG tuned shocks are matched to the coil springs and application to provide the best ride and performance possible.
The Jeep JL Stage 1 Suspension System is a coil spring 2-inch lift designed around 37-inch tires for Rubicon models and 35-inch tires for non-Rubicon models. This system is based on the Starter System with the addition of some key upgrades allowing for increased wheel travel, drivability, and performance. For more complete 2-inch lift systems, see the Stage 2 systems.
Kit Includes:
- One (1) pair of front coil springs
- One (1) pair of rear coil springs
- One (1) Snap-Lock bump stop system
- One (1) pair of rear sway bar links
- One (1) pair of rear sway bar drop brackets
- One (1) pair of front sway bar link relocation brackets
- One (1) pair of front lower control arms
- One (1) front track bar
- One (1) rear track bar relocation bracket
- One (1) parking brake cable relocation bracket
- Necessary hardware
- Installation instructions
- Coil spring suspension to easily fit larger tires
- Corrects suspension geometry to center axles and fine tune alignment
- Greatly improves wheel travel and articulation over stock and spacer lifts
- Best in class ride quality and performance when paired with coil spring matched Synergy Tuned Shocks
- Complete bolt-in system
- Compatible with OEM wheels
- No maintenance required
- Lifetime warranty on all hard parts
- Fully upgradable to higher level systems
Notes:
** Synergy MFG coil springs lift the vehicle the advertised height over stock based on a fully loaded JL Rubicon. Other JL models will see more lift over stock. These coil springs do not lift taller than advertised. The stock rake based off the Rubicon model is kept to retain its load carrying capacity. If you prefer the vehicle to sit level when unloaded, we recommend adding a small coil spacer to the front (up to 3/4 inch without affecting up travel or causing coil bind, 8017-075).
*** For off road use, the front sway bar can be disconnected on Rubicon vehicles via the built in electronic disconnect system. On non-Rubicon vehicles, we recommend the addition of our front sway bar disconnect kit, 8859-01.
**** Synergy is not responsible for maintaining finish of products. Environmental factors will affect rate of corrosion and wear for items advertised to be corrosion resistant. We recommend using protective coatings for all items that will see extended outdoor and off road use. We have had great experience with the Fluid Film product and recommend it and similar products for any items susceptible to damage from corrosion. It is great for keeping double adjuster assemblies working like new and protecting shock bodies from the elements.
***** Please allow a lead time of 8-10 weeks for production and shipping. Feel free to contact us prior to ordering for accurate lead times.
