Product Description
Synergy 2" Lift Starter System (Gladiator JT 2020+)
Synergy MFG Suspension Systems use a synergistic approach, meaning the combined effect of the components is greater than the sum of the individual parts. The overall performance of the system is the most important factor when we are designing components to work together. Synergy MFG Suspension Systems are complete systems for your vehicle and include all necessary components for the lift height and performance advertised.
The Jeep Gladiator JT Starter System is a coil spring 1 & 2-inch lift designed around 37-inch tires for Rubicon models and 35-inch tires for non-Rubicon models (See fender and bump stop spacing recommendations below). This system is designed to be the most capable performance coil spring lift on a budget, with room to upgrade as funds allow. For more complete 2-inch lift systems, see the Stage 1 or Stage 2 systems.
Kit Includes:
- One (1) pair of front coil springs
- One (1) pair of rear coil springs
- One (1) Snap-Lock bump stop spacer kit
- One (1) rear bump stop extension kit
- One (1) pair of front sway bar relocation brackets
- One (1) pair of rear sway bar drop brackets
- Necessary hardware
- Installation instructions
- Multi-rate, progressively wound coil springs increase lift height over stock
- Front and rear bump stop spacer kits are included to provide necessary clearance required for larger tires
- Front and rear sway bar link relocation brackets maintain factory sway bar geometry to allow full articulation of the suspension
- Abrasion-resistance powder coat finish
- 100% bolt on application
- Estimated installation time: 3-4 hours
Wheel & Tire Fitment:
Recommended tire size is limited by fender clearance. With higher clearance fenders or trimmed fenders, larger tires may be fitted. Bump stop spacing should be matched to the collapsed length of the shocks. Mismatched bump stop spacing and shocks will limit the available travel from the system.
Notes:
** If using stock shocks, this kit MUST be used with Shock Relocation Brackets (8817)
*** If installing on a DIESEL JT, Rear Sway Bar Links (8861-11) MUST be used instead of the Rear Sway Bar Drop Brackets (8808-01)
**** Coil springs lift the vehicle the advertised height over stock based on a fully loaded JT Rubicon. Other JT models (non-Rubicon) will see more lift over stock. If you prefer the vehicle to sit level when unloaded, we recommend adding a small coil spring spacer to the front (up to 3/4" without affecting up travel or causing bind. 8017-075)
***** Synergy MFG and Offroad Elements Inc. are not responsible for maintaining finish of products. Environmental factors will affect rate of corrosion and wear for items advertised to be corrosion resistant. We recommend using protective coatings for all items that will see extended outdoor and off road use
****** PLEASE ALLOW A LEAD TIME OF 4-6+ WEEKS FOR PRODUCTION AND SHIPPING DEPENDING ON DEMAND AND AVAILABILITY OF COMPONENTS. FEEL FREE TO CONTACT US PRIOR TO ORDERING FOR A CHECK ON INVENTORY
