Product Description
Savvy Designz Krawler Lite Front Bumper Kit (Wrangler JL & Gladiator JT 2018+)
This is the Half Kit, winch plate, front bumper skin and NO front hoop. Complete the front end of your Jeep Wrangler JL or Jeep Gladiator JT with the SAVVY KRAWLER LITE front bumper. This front bumper was designed to be the lowest profile - highest clearance and is the smallest NO frame chop front bumper on the market. There is 1.5” of extra clearance through the center of the bumper skin.One of the key features of this front bumper, if you damage it, you do not have to replace the entire front bumper, simply replace the front skin.
Customizable lighting options we have left enough clearance to allow a wide variety of lights to be installed on top of the bumper.
The SAVVY KARLWER LITE front carrier/plate is specifically designed for this bumper. Race inspired, designed and engineered to be low profile and strong. The winch plate is designed out of 3/16” steel, positions the winch to improve airflow and provides zero interference with the grille.
Designed to work with the Factor 55 Fairlead which allows maximum to keep your synthetic rope safe from any sharp laser cut edges. Unlike other bumpers on the market which have a rope hole that is tight to the fairlead causing fatigue of your synthetic line. 3/4" Thick Laser cut D-Ring mount integrated into the center of the winch plate. This winching point provides and better and safer way to winch. Also Centering the recoverpoint places it at the strogest point on the vehicle to pull from. This also eliminates yaw while winching your vehicle.
Compatible with Warn Zeon and and VR evo series winches. Will also work with some Smittybilt, Badlands and Superwinches.
This completely bolt-on Jeep JL/JT front bumper was designed, tested, and manufactured in the USA. The SAVVY KRAWLER LITE comes raw so you can powder coat or paint it any color to match your build and have the sexiest bumper on the planet!!! Designed using new and updated CAD models directly from JEEP. CNC Laser cut, and CNC bent for perfect fitment with a mix of 3/4, 3/16 and 11 GA thick steel plate.
Kit Includes:
- One (1) front bumper
- Winch plate
- Necessary hardware
- DESIGNED AND MADE IN THE U.S.A
- Designed using new and updated CAD models directly from JEEP.
- CNC Laser cut, and CNC bent for perfect fitment
- A mix of 3/4, 3/16 and 11 GA thick steel.
- Replaceable Front Skin
- Designed to work with Factor 55 Fairlead
- Designed to allow for maximum clearance on the bumper to keep your synthetic rope safe from any sharp laser cut edges. (A lot of bumper rope holes are tight to the fairlead and cause rubbing on your rope line causing fatigue of your synthetic line)
- Compatible with Warn Zeon and VR evo series winches. Will also work with some Smittybilt, Badlands and Superwinches.
- 3/4" Thick Laser cut D-Ring mount integrated into the center of the winch plate. This winching point provides a better and safer way to winch.
- Customizable lighting options. We have left enough clearance to allow a wide variety of lights to be installed on top of the bumper.
Notes:
** Winch and shackle shown are NOT included with the bumper; available separately
*** Hawse fairlead cutout is designed for the Factor55 fairlead. Other fairleads may require trimming of the opening of the cutout
