Product Description
Rock Jock 3.5" Front & Rear Coil Springs (Gladiator JT 2020+)
RockJock is famous for our coil springs! The John Currie secret recipe is renowned for being the best on-road ride and the most off-road flex, all in one spring!
Some of the secret (but not all!) to our dual rate springs is a soft initial rate that absorbs small bumps and trail chop, to deliver a smooth, comfortable ride, while a firmer secondary rate helps soak up larger impacts and reduce bottoming.
A key differentiator of RockJock spec. dual-rate springs is the positioning of the crossover point between the initial and secondary spring rates so that a portion of the softer initial rate is available and active at ride height before crossing over to the firmer secondary rate deeper into the travel.
This specific coil spring set for JT Gladiator vehicles provides a 3 1/2 in. lift (over standard model springs) and directly replaces the factory coil springs. Use with RockJock Johnny Joint suspension systems or other manufacturer's 3 to 5 in. lift kits. Besides lifting the vehicle 3 1/2 in., this spring set also levels the vehicle and provides an improved ride.
Kit Includes:
- One (1) pair of front coil springs
- One (1) pair of rear coil springs
- Front – 20.000 in.
- Rear – 22.250 in.
- For use in all models of JT Gladiator.
- We recommend installing the proper bump stops in conjunction with these springs. See our RJ-107101-101, our CE-9818FBSK and our RJ-151401-101 front and rear bump stop kit options.
- Intended for use in gas, V-6 powered vehicles.
- Actual lift amount will vary due to factory produced vehicle variances as well as weight of added on aftermarket equipment.
- You can expect around a 3 1/2 in. lift in standard models. Rubicon and Mojave models will gain less actual lift because they are already lifted higher than the standard model vehicles from the factory.
- Springs are finished in gloss black powder coat.
