Product Description
Next Venture Motorsports Frame Mounted Rimrocker Rock Sliders | 4 Door (Wrangler JK 2007-2018)
These are our heaviest duty rock sliders for the JKU. We designed to work with long arm kits (with straight rear lower links) and other popular upgrades without lots of modification... and of course to cruise down the hardest trails without a worry in the world!
If you want rock sliders you can bounce off of big rocks day after day, wheeling trip after wheeling trip, you'll care as much about what they're made of as what they're mounted to. That is why we mount these off of the frame and recommend *welding* them to the frame -- because, unlike bolts, welds don't back out and come loose after vibrations or boulders.
These are made from a combination of 2" DOM Round Tube (120 wall) and 1/4"+3/16" laser cut steel plate that is CNC formed. The 3/16" laser cut steel plate that spans the distance between the 2 structural tubes is designed with minimal rock catching cutouts -- to provide a strong smooth surface that will slide over rocks and obstacles while still allowing for drain cutouts near the bottom. The lower tube can also be supplemented with a solid aluminum insert for added strength against the toughest drops. Inserts are made of 1.75" OD 6061 Solid Stock, and increase the effective wall thickness and strength of the rock sliders and make them practically impossible to dent.
Due to the gussets/reinforcements that prevent unwanted flex of the rock sliders, 1 small notche for clearance (using a cut and fold method) are required in the rear section of the JKU pinch seam.
Kit Includes:
- One (1) pair of rock sliders
- Optional aluminum inserts
- Necessary hardware
- Laser cut & CNC formed
- Optional aluminum inserts adds strength against the toughest drops
- 1/4" & 3/16" steel plate construction
- Designed with minimal rock-catching cutouts
Notes:
** THESE SLIDERS ARE MADE TO ORDER. PLEASE ALLOW A LEAD TIME OF 5-7 WEEKS FOR PRODUCTION AND SHIPPING DEPENDING ON DEMAND. FEEL FREE TO CONTACT US PRIOR TO ORDERING FOR A CHECK ON INVENTORY.
*** 1 small notch for clearance (using a cut and fold method) is required in the rear section of the pinch seam
**** Bare metal products may have slight imperfections as a result of raw material handling, manufacturing and fabrication. These imperfections are easily covered up with a textured powder coat finish. Additional finishing, sanding and prep work may be required if you wish to have them finished in a smooth powder coat or paint.