Product Description
Nemesis Industries Front Inner Fender Liner | 392 | 4 Door (Wrangler JL 2021+)
With Jeep's release of the 392 Wrangler we were hopeful that the redesigned diesel liners would cross over to the 392. By utilizing the diesel liner as our base we kept our style and goals in place. We were again able to maximize wheel well clearance, maintain engine bay coverage and ensure compatibility with the Falcon series shocks including the 3.3 without modification. The same pocket concept for the reservoirs was utilized to work with the Falcon 3.3 shocks and again give customers the ability to mount remote reservoirs or lights in the pocket if not running Falcon Shocks.
Recognizing the probability of customers mounting reservoirs or lights to the liners we wanted to make sure there would be sufficient strength incorporated into the design to withstand the strains of a life off road. By using .090” aluminum and following as closely to the underside of the wheel well we added strength through a series of complex bends and weld seams. If we were to simply use a flat piece of aluminum with a few bends the vibration of driving down the road alone would lead to premature failure much less contending with the additional weight of a reservoir being mounted to it. Careful consideration and testing goes into every product but this one definitely took some time to ensure it would be worthy of the Nemesis name.
If you are concerned with having enough clearance for 40”+ tires please contact us to discuss your build specifics. We have a number of customers on 40’s running these with no issues.
Installation is straightforward, however if you are running the Falcon 3.3 shocks the shock will need to be removed to complete the install of the liner.
Kit Includes:
- One (1) pair of front inner fender liners
- Available in bare, textured black powder coat or semi-gloss powder coat finish
- Aluminum construction
- Made in the USA
Notes:
** PLEASE ALLOW A LEAD TIME OF 4-6 WEEKS FOR PRODUCTION AND SHIPPING DEPENDING ON DEMAND. FEEL FREE TO CONTACT US PRIOR TO ORDERING FOR A CHECK ON INVENTORY
*** Made specifically for the 392 model
**** Requires nutsert tool with a 1/4"x -20 mandrel & "W" size drill bit
