Product Description
Motobilt Hammer Front Bumper with Stinger & Skid Plate (Wrangler JL 2018+)
Motobilt now offers the Jeep JL Hammer Stinger front bumper with skid plate and fog light holes. It features DOM steel tube stinger, built in provisions for factory style fog lights, and the skid plate is laser cut from 3/16 inch P and O steel and formed on a press brake. The Motobilt Jeep JL Front Hammer Bumper is a 48.5 inch wide, sleek, tight-fitting design proudly made in the USA. Our JL Hammer Bumper is 3D CAD designed to ensure the best possible fit to your Jeep JL. The bumper will fit all 2018 and newer models of the Jeep JL 2 door and 4 door JL Unlimited. The front d-ring mounts are CNC cut from 3/4 inch thick steel plate and pass through the bumper where they weld to the bumper mounting plates in addition to the bumper body. This was done for added strength to the recovery point.
The Hammer bumper has provisions to mount the factory fog lights or aftermarket LED fog lights. We have pre-installed riv nuts for 10-24 screws in the factory bolt pattern. The Hammer bumper can be run with or without the optional skid plate. The ends of the Hammer bumper taper up for tire clearance. Each cut in the bumper was intentional to keep it tight to the frame rail for a better approach angle. The main construction of the bumper is fabricated from 3/16 inch thick high strength steel plate. The bumper also serves as a winch mount. The top side of the JL Hammer bumper has bolt holes for a recovery winch.
Kit Includes:
- One (1) front bumper
- One (1) integrated skid plate
- Necesary hardware
- Installation instructions
- Stinger made from 1-3/4" steel DOM tubing
- Laser cut gussets made from 3/16" steel
- Bolt on design
- Pass-through d-ring mounts welded to the bumper
- Includes fog light provisions
- Pre-installed riv nuts for 10-24 screws for factory fog lights
- Made in the USA
Notes:
** If installing a winch, a fairlead mount will also need to be purchased (p/n MB1002)
*** Ships bare for painting or powder coating prior to installation
**** Factory frame holes may need to be opened up to 5/8" due to tolerance difference in the factory frame rails
***** Please allow a 2-3 week lead time for production and shipping.