Product Description
J.E. Reel Front 1350 Heavy Duty CV Driveline | Automatic Transmission (Wrangler JK 2012-2018)
A JE Reel Heavy Duty Front Drive Shaft for JK Wranglers is designed to get you places that a stock shaft just cannot handle. Built for Jeeps with short-arm lifts up to 4.5" and engineered to handle 35" tires, they eliminate the CV joint in lieu of massive 1350 U-Joints that are easier to find and service in the case of an emergency. J.E. Reel Shaft kits include all of the conversion yokes and hardware needed for a simple swap to get you back on the road faster.
Kit Includes:
- Driveshaft
- 1350 u-joints and u-bolts
- Cast u-bolt style yoke
- Forged t/c/ flange
- Grade 8 hardware
- Installation instructions
- Reel Shafts are made from 2"x.120 tubing for incredible strength on the road or trail, includes a cast U-Bolt style yoke for even greater strength and ease of service.
- Designed for simple installation on Jeeps with up to 4-1/2" of lift and engineered to increase flexibility
- Max Tire Size 35" Reel Shafts can out perform their parts, tire size is limited due to the U-Joints, bigger tires need bigger U-Joints
- This system is a stronger than our 1310 style shaft and takes you from a 26* C.V. angle to a 32* C.V. angle.
- Lifts higher than 4.5", long arm lifts & any other than stock rear axle must be measured for driveline length.
- Estimated installation time: 2-3 hours
- Warranty: 180 days from purchase date for materials and workmanship/welds are covered for the life of the driveshaft
Notes:
** PLEASE ALLOW A LEAD TIME OF 1-2 WEEKS FOR PRODUCTION AND SHIPPING
*** For lifts higher than 4.5", long arm lifts or anything other than stock rear axle, please contact us prior to ordering for measurement
