Product Description
EVO Manufacturing 2.5" Enforcer Suspension- 4 Door | 4XE | Stages 1-4 (Wrangler JL 2018+)
Our main goal in developing this kit was to give a smooth ride on and off road while giving additional lift with increased performance. The JL Enforcer kits are specifically designed to lift your JL and maintain compliant spring rate, and smooth ride quality. These kits come with a set of 2.5” Plush Ride Lift springs specific to each corner which will keep the Jeep Wrangler JL Level side to side and will maintain a unique and compliant ride quality. EVO MFG JL Enforcer kits are available in multiple configurations to suit your needs and budget and are up gradable down the road. These Enforcer kits will fit up to a 37” tires on Rubicon Model JLs or 37” tires on Sahara and Sport/S.
The difference with EVO MFG Enforcer Overland systems vs EVO MFG Enforcer systems is the use of front Overland Control Arm Brackets. When lifting your vehicle your control arms at ride height have a steeper angle towards the floor which can have some negative effect/chop in ride quality. With the use of the included Overland Control Arm brackets we relocate the front control arm mounting locations at the frame. In doing this when lifted we maintain factory flatter control arm angles and while minimal, we alleviate much of the chop associated with lifting a Jeep giving even better and more improved ride quality. Also, in the use of Overland Drop Brackets we are able to engineer more performance into the front suspension to improve braking and driveline angles through suspension cycle. Both kits drive very well, the Overland Kits are better suited for less hard off-road crawling and more light off road and on road use.
Kit Includes:
- One (1) pair of front springs
- One (1) pair of rear springs
- 2.5" Enforcer component kit
- Front lower adjustable control arms (Stage 2, 3 & 4)
- Rear upper adjustable control arms (Stage 3 & 4)
- All 8 adjustable front and rear control arms (Stage 4)
- Necessary hardware
- Installation instructions
- Will allow for up to 37" tires on all models
- 2.5" lift based on 4 Door Rubicon model. 4 Door Sport/Sahara models will see slightly higher increases over stock and will match overall lift height of a Rubicon model
- Overland option uses front overland control arm brackets to relocate front control arm mounting locations at the frame
- Estimated installation time: 8-12 hours
Notes:
** PLEASE ALLOW A LEAD TIME OF 3-4 WEEKS FOR PRODUCTION AND SHIPPING DEPENDING ON DEMAND AND STAGE CHOICE. FEEL FREE TO CONTACT US PRIOR TO ORDERING FOR A CHECK ON INVENTORY
