Product Description
Artec Aluminum Rear Track Bar (4Runner 2010+)
This kit is a great replacement for weak factory track bars and is designed to correct vehicle geometry after lifting the vehicle. The double adjustable ends mean you can use this on nearly any height of lift kit. These links are light, strong and have been engineer to increase off-road ride quality and performance. The polished aluminum also stands out contrasted to the dark vehicle frame for a high end look.
The 4Runner 5th Gen ALUMINUM Track bar kit starts with 1.5" outer diameter, aerospace grade 7075 Aluminum lower bars with 7/8" thread JMX PRO Rod Ends (heims) at the ends with matching jam nuts. The link is threaded with both a Right Hand thread and a Left Hand thread at opposite ends so it is easy to adjust the length for fine tuning. We've also included wrench flats on each end of the aluminum link so you can easily tighten your jam nuts without marring the aluminum. Includes high misalignment spacers for maximum flex and correct width and bolt size.
Kit Includes:
- One (1) - RH, 1 - LH - 7/8" -14 tpi JMX Pro Rod Ends
- One (1) - RH, 1 - LH - 7/8" -14 tpi Jam Nuts
- Four (4) - 7/8" x 14 mm High Misalignment Spacers
- One (1) - 1.5" OD 7075-T6 Polished Track bar
- One (1) - RH, 1 - LH - 7/8" -14 tpi JMX Pro Rod Ends
- One (1) - RH, 1 - LH - 7/8" -14 tpi Jam Nuts
- Four (4) - 7/8" x 14 mm High Misalignment Spacers
- One (1) - 1.5" OD 7075-T6 Polished Track bar
Notes:
** Only for use with lifted vehicles- not stock height
** Only for use with lifted vehicles- not stock height
Fits:
Toyota Gen5 4Runner (2010+)
Product Videos
Custom Field
Shipping Cost Free Ground Shipping within the Contiguous US
