Product Description
Advanced Driveline Dana 44/60 Heavy Duty Axle Set (Gladiator JT 2020+)
Advanced Driveline Gladiator JT bolt in axle assemblies feature BEEFY axle tubes, 1/4" & 3/16" brackets, along with heavy duty outer C's, chromoly axles and massive 40 SPLINE rear axle shafts. Including our heavy duty nodular iron diff covers to further protect the internals. All assemblies are built in-house at our facility in Abington Massachusetts built to your specifications.
Dana 44 Front Axle Features:
- 1/2" Tube Wall
- High And Low Trackbar Mount Positions
- Heavy Duty Outer C's
- Heavy Duty Differential Covers
- Thick Brackets All Around (Trackbar Bracket, Coil Buckets, Control Arm Mounts, Sway Bar Tabs)
- Increased Caster For Lifted Applications
- Dynatrac Heavy Duty Ball Joints (PN JP44-2X3050-E)
- Includes OEM Style Spicer Companion Flange, 1310 or 1350 Yoke Depending on Driveshaft
- WMS 68", to Match OEM Rubicon / Gladiator / or Max Tow / Wide Trac Width
- Axles Are Set Up With 10* Of Separation Compared To 6* On The Stock Axle To Improve Pinion Angle
- Front Adjustable Upper Control Arms -or- Upper/Lower Control Arms Required For Proper Alignment
- This axle does eliminate the factory FAD disconnect. The FAD which is present on all JL and JT Jeeps disconnects left and right front axles from each other when the vehicle is in two-wheel-drive. This sensor will need to be disabled using a TAZER Mini or TAZER Lite.
- ARB Air Locking Selectable Differential (PN RD147)
- RCV Performance Axle Shafts (PN CVJ44-JL-35)
Dana 60 Rear 35 Spline Axle Features;
- 3.5" Diameter x 7/16" Tube Wall
- Heavy Duty Differential Cover
- Thick Brackets All Around (Trackbar Bracket, Coil Buckets, Control Arm Mounts, Sway Bar Tabs)
- Raised Trackbar Bracket
- ARB Air Locker, 40 Spline
- Chromoly 40 Spline Axle Shafts
- Increased Pinion Angle For Lifted Applications
- Includes Parking Brake Assembly
- Includes 1350 Pinion Yoke (1350 Driveshaft Required After Installation)
Notes:
** If your Jeep is equipped with electric lockers, use your Tazer device to disable the locker light from flashing on the dash.
*** Requires ARB Air Compressor (ARB CKMA12, CKMTA12, or CKSA12)
**** THIS ITEM IS BUILT TO ORDER. PLEASE ALLOW A LEAD TIME OF 6-8 WEEKS FOR PRODUCTION AND SHIPPING DEPENDING ON DEMAND. FEEL FREE TO CONTACT US PRIOR TO ORDERING FOR A CHECK ON INVENTORY
***** THIS DANA 44 FRONT CENTER SECTION USES A CONVENTIONAL DANA 44 INTERNALS, DOES NOT USE M210 DANA 44™ ADVANTEK® AXLE PARTS
******Looking for a different variation of components? Brackets left off, loose or tacked in place? We build all of our housings to suite your needs. Contact us today!
Fits:
Jeep Gladiator JT (2020+)
Fits All Models and Motors 3.6, Diesel, and 392 Swapped
