The ACCUAIR rear only kit is the fix for your forever rear sag. The rear only kit fits Jeep JT that have at least a 2” to 5.5” lift and it will add the that needed leveling for towing, weight of heavy loads, camping and overlanding equipment. This system utilizes the Accuair air system and Accuair air springs plus your aftermarket lift shocks to be affordable and effective. The Rear only kit includes an Accuair ECU and a full-on board air system with port to air up tires other inflatables.

Eliminate the sag with the rear only kit and keep your vehicle level and safe while towing or carrying heavy loads. Air springs are used to support vehicles instead of coil springs. This is not the same as helper air springs that assist the coil spring suspension. With helper springs, the ride can be rougher due to the added spring force, but that's not an issue with a dedicated air spring. You don't have to guess about spring lengths or rates to get the right height for your Jeep while towing or all that overlanding gear.

Kit Includes:
- Rear air springs
- Ride height sensor assemblies
- Rear upper control arms
- Limit straps
- Sway bar end links
- Inflation assembly with air compressor, tank, valve manifold
- Touchpad controller
- ECU and on-board air port
- 30ft accessory hose and air chucks

Jeep must have an existing 2” to 5.5” lift to use Accuair Rear only kit
Levels vehicle automatically
Increases safety while towing
Improved handling characteristics while towing or under heavy loads
Fixes forever sag from heavy Overlanding equipment
Will level vehicle from left to right also
Maintains off off-road capability of your existing lift kit

AccuAir Suspension Rear Air Conversion Towing Kit | w/ 2-5.5" Lift (Gladiator JT 2020+)